ETP Typ ”A”
Sleeve for permanent assembly. Made in short lengths to allow for a light press fit. The tool and sleeve should be bolted together. Pressurizing is carried out with a high pressure grease pump.

Type A: pressurized by a grease pump

ETP Typ ”AI”
A complete and totally sealed system for existing or new cutter tools. Two hydraulic sleeves which are an easy press fit in each end of the tool are connected by a small channel in thebody of the cutter. Pressurization of the entire unit can be carried out either axially or radiallyusing by allen T-wrench.

ETP typ ”AL” och ”AIL”

AL and AIL are for permanent assembly. Made to allow for a light press fit. The tool and HYDRO-GRIP should be bolted together. Type AL: Pressurizing is carried out with a high pressure grease pump, axially in the sleeve’s flange. Type AIL: pressurized by allen T-wrench.

ETP typ ”BI”

Sleeve for interchangeable tool assembly, the same basic construction as the CI but also has a thread and locking nut. This means the sleeve can be easily switched between different tools. Several tools can be mounted to the same sleeve. Pressurizing is carried out with an allen T-wrench.

ETP Typ ”BL”

Sleeve for interchangeable tool assembly. Has a thread and locking nut. This means the sleeve can be easily switched between different tools. Pressurizing is carried out with ahigh pressure grease pump, axially in the sleeve’s flange. Type BL: pressurized by a grease pump.

ETP typ ”C”

Sleeve for interchangeable tool assembly which can easily be switched between different tools. The tool is fastened to the sleeve by bolts through the collar. Several tools can be mounted simultaneously on the same sleeve. Pressurizing is carried out with a high pressure grease pump. This allows the use of longer sleeves.

ETP Typ ”CI”

Sleeve for interchangeable tool assembly that can be used with different tools. The toolshould be bolted to the sleeve’s collar. Several tools can be mounted simultaneously. Pressurizing is carried out with an allen T-wrench.

ETP – fettpump

Högtryckspump M08 för trycksättning av hydrobussningar.

x)=    Normal lagervara
xx)=  Leveranstid ca 1 vecka
xxx)=Leveranstid ca 4 veckor